Polycom Group Series Call Using a Pre-set

Method 1:

1. Select the green Call button on the Group Series remote.
2. Scroll all the way up and to the left on the display and click Contacts.
3. Use the search bar below or scroll through the pre-sets on the right to find the desired contact.
4. Select the pre-set and press Call.

Method 2:

Method 2 outlines how to call a pre-set from a paired RP Touch device. If your RP Touch is not paired, refer to Pair an RP Touch with a Group Series Endpoint.

1. Tap the screen of the RP Touch to wake the device.
2. Press Place Call.

3. Press Contacts in the top left corner.

4. Use the search bar or scroll to find the pre-set you want to dial and select it.
5. Press the green video button to start the call.