Polycom VVX Direct VMR Dial Pre-set

This pre-set allows you to connect to a specific VMR on the RP1Cloud MeetMe Service from a registered RP1Rooms VVX.

1. From your VVX home screen, select Directories.
2. Select Contact Directory…
3. Click the add button (+).

4. Enter:
   1. First and last name (Optional)
   2. Contact (Required): <VMR number>
      Note: If the contact is not an RP1 user, add the domain after the VMR number. For example: 1234567@domain.com
   3. Job Title (Optional)
   4. Email (Optional)
   5. Favorite Index (Recommended: you can later access this pre-set quickly in the Favorites directory)
   6. Label (Optional)
   7. Protocol: SIP
   8. Ring Type (Optional)
   9. Divert Contact (Optional)
   10. Auto Reject (Optional)
   11. Auto Divert (Optional)

Note: All the pre-set fields are optional apart from the Contact field. There is, however, a benefit to completing as many fields as you can since you can focus a search on any of these categories.

5. Select Save in the bottom left corner.